Converter quang Hasivo SW108GM là bộ chuyển đổi quang điện 1 cổng RJ45 Gigabit 10/100/1000Mbps và 1 giao diện quang SC 1000BaseX, khoảng cách 20km. Chuyển đổi quang điện SW108GM phù hợp với các ứng dụng mở rộng mạng LAN, có khả năng truyền tín hiệu về trung tâm từ xa qua mạng cáp quang với khoảng cách 20km.
- Converter quang Hasivo SW108GM A/B 1 sợi quang, công nghệ ghép bước sóng WDM, truyền 2 bước sóng 1310nm/1550nm trên cùng 1 sợi quang cho cả chiều lên và chiều xuống đồng thời. Converter quang 1 sợi SW108GM thường sẽ đi theo 1 cặp A/B, tiết kiệm sợi cáp quang trong việc truyền dẫn tín hiệu.
- Converter quang SW108GM 2 sợi quang, bước sóng 1310nm hoặc 1550nm.
Converter quang SW108GM là giải pháp đơn giản để kết nối giữa các chi nhánh, văn phòng và truyền dữ liệu từ các Camera IP, điện thoại IP, thiết bị Wifi AP qua cáp sợi quang về trung tâm.
Mục lục:
Các tính năng chính Converter quang Hasivo SW108GM
- 1 cổng Gigabit RJ45 10/100/1000Mbps
- 1 cổng quang tích hợp sẵn, phiên bản SW108GM 2 sợi quang Single-mode 1310nm hoặc 1550nm. Hoặc SW108GM A/B 1 sợi quang SM 1310nm/1550nm đồng thời. Khoảng cách 20km
- Hỗ trợ Plug and Play
- Nguồn điện: 100~240VAC
Thông số kỹ thuật bộ chuyển đổi quang điện SW108GM
Specification
| Rate | 10/100/1000M |
| Protocol | supported IEEE802.3 |
| Fiber type | dual fiber |
| Optic mode | single |
| Transmission mode | half / full duplex |
| Ethernet interface | RJ-45 |
| Optic interface | SC/FC/ST |
| Optic wavelength | 1310nm |
| BER | < 1/1000000000 |
| MTBF | 3 years |
| POWER | 2.5W |
| Power supply | AC220V/0.5A,DC-48 V /0.5A, DC5V/1A,2A |
| Working temperature | 0~50℃ |
| Working humidity | 5%-95% |
| Storage temperature | -40℃~70℃ |
| Storage humidity | 5%~95%(no-condensing) |
Features
* Supports 10/100/1000Base-T, 1000Base-X protocol.
* Flow control for full duplex and half duplex.
* Supports up to 10k byte JUMBO frame.
* Supports Fiber Port Trunking, Increasing Fiber Channel Bandwidth and Supply Fiber Channel Redundancy.
* Supports Ports Based VLANS and TAG Based VLANS.
* In conformity to safety code of FCC and CE MARK.
* Connector: Multi-UTP RJ-45connector, one or two fiber connector
* Operation mode: full duplex mode or half duplex mode
* Power supply parameter: DC 5V 1A/2A
* Environmental temperature: 0-50℃
* Relative humidity: 5%-90%
* UTP cable: Cat5 UTP cable
* Transfer fiber: multimode(50/125, 62.5/125 or 100/140um); single mod( 8.3/125,8.7/125, 9/125 or 10/125um).
Application
* Extend your Ethernet connection up to 0~120km away using fiber optics.
* Creates an economical Ethernet-fiber/copper-fiber link for connecting remote sub-networks to larger fiber optic networks/backbones.
* Converts Ethernet to fiber, fiber to copper/Ethernet, ensuring optimum network Scalability for connecting two or more Ethernet network nodes (e.g. connecting two buildings on the same campus).
* Designed to provide high-speed bandwidth for demanding large scale work groups that require expansion of Gigabit Ethernet Network.
* Intelligent transportation supervisory system (ITS)
* High-speed Way supervisory/Tele-Communication System
* Large corporations, network security monitoring system, multifunction system
*Long-distance Muti-media Schooling,Campus monitoring, long-distance broadcast television transmission system.
Specification
| Rate | 10/100/1000M |
| Protocol | supported IEEE802.3 |
| Fiber type | dual fiber |
| Optic mode | single |
| Transmission mode | half / full duplex |
| Ethernet interface | RJ-45 |
| Optic interface | SC/FC/ST |
| Optic wavelength | 1310nm |
| BER | < 1/1000000000 |
| MTBF | 3 years |
| POWER | 2.5W |
| Power supply | AC220V/0.5A,DC-48 V /0.5A, DC5V/1A,2A |
| Working temperature | 0~50℃ |
| Working humidity | 5%-95% |
| Storage temperature | -40℃~70℃ |
| Storage humidity | 5%~95%(no-condensing) |
Features
* Supports 10/100/1000Base-T, 1000Base-X protocol.
* Flow control for full duplex and half duplex.
* Supports up to 10k byte JUMBO frame.
* Supports Fiber Port Trunking, Increasing Fiber Channel Bandwidth and Supply Fiber Channel Redundancy.
* Supports Ports Based VLANS and TAG Based VLANS.
* In conformity to safety code of FCC and CE MARK.
* Connector: Multi-UTP RJ-45connector, one or two fiber connector
* Operation mode: full duplex mode or half duplex mode
* Power supply parameter: DC 5V 1A/2A
* Environmental temperature: 0-50℃
* Relative humidity: 5%-90%
* UTP cable: Cat5 UTP cable
* Transfer fiber: multimode(50/125, 62.5/125 or 100/140um); single mod( 8.3/125,8.7/125, 9/125 or 10/125um).
Application
* Extend your Ethernet connection up to 0~120km away using fiber optics.
* Creates an economical Ethernet-fiber/copper-fiber link for connecting remote sub-networks to larger fiber optic networks/backbones.
* Converts Ethernet to fiber, fiber to copper/Ethernet, ensuring optimum network Scalability for connecting two or more Ethernet network nodes (e.g. connecting two buildings on the same campus).
* Designed to provide high-speed bandwidth for demanding large scale work groups that require expansion of Gigabit Ethernet Network.
* Intelligent transportation supervisory system (ITS)
* High-speed Way supervisory/Tele-Communication System
* Large corporations, network security monitoring system, multifunction system
*Long-distance Muti-media Schooling,Campus monitoring, long-distance broadcast television transmission system.
Chat với tư vấn viên
Gọi ngay